Frequently Asked Questions

1. What is the difference between each M.S. System?

Each M.S. System is designed to custom fit specific garden tank sprayers. That's the only difference! All M.S. Systems do the same thing, and their only difference is in the pieces that allow them to connect to a variety of garden tank sprayers.

2. Do we make systems for Round Up, Chapin and other brand HANDHELD tank sprayers?

The short answer is no, but read further to find out why!  

We don't recommend any handheld tank sprayers that don't have a shoulder strap OR have the ability to clip the wand handle into the pump handle. Without these features, it is very awkward for the user to hold two handles in one hand and also operate the trigger.

Home Depot & Hudson are the only handheld tank sprayers with the ability to clip the wand handle into the pump handle (see above photo). This feature makes it easy for the user because they only have to hold one handle, their thumb naturally rests on the valve of the trigger, and ultimately it makes for easy and comfortable use of the M.S. System.

Bottom line: The easy grip of the Home Depot and Hudson tanks cannot be matched with other handheld tanks that don't have the wand handle clip or shoulder strap option.

3. Do we make a system for the battery powered Ryobi handheld tank sprayer?

The short answer is no, but read further to find out why! 

The design of the Ryobi sprayer is not ideal for the M.S. System because if any liquid ever leaked from the connection point, it could drop onto the battery and possibly damage the sprayer...we certainly don't want that!

4. Why don't we use a misting nozzle tip?

Misting nozzle tips require cleaning after each use due to the very fine holes on the nozzle that clog easily. The M.S. System nozzle does not require any cleaning or maintenance!  

Our nozzle concept is similar to that of a professional backpack mist blower nozzle which drops liquid into the middle of the blower tube, and the blower turns the liquid into a mist. The M.S. System nozzle works in the same fashion and is universal to all blower tubes because you can adjust the height of the liquid delivery to the center of your blower tube (see comparison photo).  

We wanted to ensure EASY use for M.S. System buyers!

5. Why don't we have a diffuser cap on the end of the M.S. System nozzle to direct the spray pattern?

The diffuser cap must be tight against the blower tube in order to work effectively because if any air flow escapes around the diffuser cap, the spray pattern becomes ineffective. The only way to ensure the diffuser cap tightness on the blower tube is if the user modified their blower tube by drilling a hole in the blower tube about 4" from the diffuser cap.  We don't want M.S. System buyers to have to make any alterations to their blower tubes because we are all about EASY use around here!